Search

Hook and Claw Dry

Category

Vacuum solutions

Clients

Solara, Kentegra , Sutec

Hook and Claw Dry Vacuum Pump Description

Hook and Claw Dry VCX Series dry pump is designed to operate without the need for lubricants, making it a suitable choice for applications where contamination from lubricants is a concern. The modular construction of the VCX Series allows for easy maintenance and repair, as individual compartments can be easily accessed and replaced if necessary. In addition, the use of labyrinth seals helps to prevent the mixing of pumping and gear chamber fluids, ensuring optimal performance and prolonging the life of the pump. Overall, the Hook and Claw Dry VCX Series dry pump is a reliable and efficient choice for a variety of applications.

  • Hook and claw pumps, also known as rotary claw pumps, are mechanical devices used to generate vacuum or compress gases.
  • They work by using two interlocking claws or hooks that rotate in opposite directions to draw in and compress gas or vapor.
  • These pumps are often used in industrial and scientific applications where a dry, oil-free vacuum is required, such as in the food, pharmaceutical, and chemical processing industries.
  • Hook and claw pumps are known for their durability and low maintenance requirements, as they have few moving parts and do not require the use of a sealing liquid.
  • The VCX Series of hook and claw pumps is constructed in modular compartments, with the pumping and gear chambers separated by labyrinth seals. This helps to ensure reliable operation and extend the life of the pump.
  • These pumps are a good alternative to liquid ring vacuum pumps, as they do not generate any effluent and do not require the use of a sealing liquid. They are also well-suited for rough operation in low vacuum conditions.
  • Non-Contact Design
  • Air Cooled and Direct Driven
  • Oil-Free (Dry) Pumping Chamber
  • Simple, Modular Construction
  • Suitable for Variable Speed Applications
  • No pollution – Oil free exhaust gas over the entire range of operating pressure – from atmospheric pressure to ultimate pressure
  • Non-return valve to prevent oil entry into the system in the event of power failure.
  • The system is designed to operate at 80 Deg. C enhancing moisture and vapour handling capacity
  • Chemical & Pharmaceutical Process plants
  • Vapour Recovery
  • De aeration
  • Extruders
  • Distillation
  • Central Vacuum Systems
Request for Product Specifications

Send Request

Hook and Claw Dry find applications in:

  • Pharma
  • Holding & Lifting
  • Chemical
  •  Pick and Place
  • Central Vacuum Systems.
  • Packaging
  • Plastics Industries

Variants in Hook and Claw Dry

Other products in this category

Case
studies

Don’t just take our word for it. See how our solutions are helping our clients exactly the way they should be.

Frequently Asked Questions

A hook-and-claw dry vacuum pump is a type of mechanical pump that uses a rotating claw and hook mechanism to create a vacuum. It is commonly used in applications where it is important to avoid contaminating the pumped fluid with oil or other lubricants.
A hook-and-claw dry vacuum pump consists of a rotor with claws and hooks that rotate inside a cylindrical chamber. As the rotor rotates, the claws and hooks trap and compress pockets of air, which are then expelled through an exhaust port, creating a vacuum. Because the pump does not require lubrication, it can be used to handle fluids that may be sensitive to contamination.
Hook-and-claw dry vacuum pumps are simple and reliable, and they can be used to create a wide range of vacuum levels. They are also relatively compact and can be easily installed in various configurations. Because they do not require lubrication, they can be used in applications where it is important to avoid contaminating the pumped fluid.
Yes, there are a few special considerations to keep in mind when using a hook-and-claw dry vacuum pump:
When selecting a hook-and-claw dry vacuum pump, it’s important to consider factors such as the type and volume of the fluid being pumped, the required vacuum level, and the overall cost of the pump. It’s also important to choose to buy from a top pump manufacturer in Mumbai with a proven track record of quality and reliability.
logo

Economy Process Solutions Pvt. Ltd is a leading provider of vacuum and process solutions in India since 1926. Our commitment to quality and innovation has made us a trusted choice for businesses globally.

Contact Us

1401, Vikas Centre, Dr. C. Gidwani Road Chembur (E) Mumbai 400 074

© 2023 Economy Process Solutions Private Limited.

Powered by : Ginger Domain